Netgear Printer PS101 User Manual download pdf (Page 7)

Note: The PS101 Print Server, by default, automatically obtains an IP address from

the network. However, NETGEAR recommends you use a fixed IP address to be

able to use a Web browser to print a test page or to make configuration changes

later. For a home or small office, use IP address information compatible with your

router setup. The IP address for the print server needs to be unique in the network.

If you don’t know what to use, you may click

Suggest New Values to get a useable

IP address. If you are using a NETGEAR router with default settings, the following

settings should work:

IP address: 192.168.0.150 (The first three numbers should match the

numbers for the network device. Make sure the last 3 digits are unique

on your network.)

Subnet mask: 255.255.255.0

Gateway IP address: 192.168.0.1 (the address of your router)

3. When complete, click Finish.

4. When asked if you want to set up a printer right away, click Yes and continue to

procedure 4: Confirgure a Computer To Access the Print Server. You have already completed

the software installation and are running the NETGEAR Add Printer Wizard.

Advanced Settings

Advanced users may want to change the default name of the Print Server or make other

changes in the settings. There are 2 ways to administer your NETGEAR Print Server. The

Reference Manual on the Resource CD has full instructions.

a. Open a Web browser and go to the IP address for the print server. (For example, type

http://192.168.0.150 and click Go.) or

b. You can use the NETGEAR Print Server Administration program. Click Start. Point to

Programs and click NETGEAR Print Server>NETGEAR Print Server Administration.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Netgear Printer PS101 User Manual Page 7