Netgear WNA1100 User Manual download pdf (Page 28)

Wireless-N 150 USB Adapter WNA1100v1 User Manual

2-8

v1.0, December 2009

5. Verify wireless connectivity between your peer devices with the ping program:

a. On the Windows taskbar, select Start > Run.

b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type:

ping -t 192.168.0.1

and then click OK.

c. A continuous ping is sent to the device with the 192.168.0.1 static IP address. The ping

response should change to Reply.

At this point the connection is established.

Starting a Computer-to-Computer (Ad Hoc) Network Connection

1. On the Settings tab of the Smart Wizard, select or type the network name (SSID).

2. Select the Computer-to-Computer (Ad Hoc) network type.

Figure 2-7

Figure 2-8

Note: If you cannot connect, see “Ad Hoc Mode Is Not Working Correctly” on page 4-4

and “Troubleshooting Tips” on page 4-1.

Note: for Windows Vista computers, you must have administrator rights. Otherwise,

this option is not available for selection.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

No comments

Netgear WNA1100 User Manual Page 28