Netgear WMS5316 User Manual download pdf (Page 50)

50 | Chapter 7: Maintenance

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Remote Management

You can enable SSH or Telnet in order to remotely log in to the controller or access point

groups.

Remote Console for the Wireless Management System

From the Maintenance tab select Remote Management > System > Remote Console:

1. Select the radio button for SSH or Telnet:

• Secure Shell (SSH): If set to Enable, the wireless management system will allow

remote access by using Secure Shell.

• Telnet: If set to Enable, the wireless management system allows remote access by

using Telnet.

2. Click Apply to save your settings.

Advanced Remote Console for Access Point Groups

Enable SSH or Telnet to log in to managed access points. These settings are applied only on

managed ProSafe access points that support SSH and Telnet.

1. Use the Group tab to select the settings for a specified group of access points. The

access points that have not been assigned any group share the settings of Group 1.

• Secure Shell (SSH): If set to Enable, the access points allow remote access using

Secure Shell.

• Telnet: If set to Enable, the access points allow remote access using Telnet.

2. Click Apply to save the selected settings.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 65 66

No comments

Netgear WMS5316 User Manual Page 50