Netgear WMS5316 User Manual download pdf (Page 49)

Chapter 7: Maintenance | 49

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

• Trap Community Name: The community name that is associated with the IP address to

receive traps.

• IP address to Receive Traps: The IP address at which the SNMP manager receives

traps sent from the wireless management system.

• Trap Port: The port on which the SNMP manager receives traps sent from the wireless

management system. The default setting is port 162.

• SNMP Manager IP: Restrict access to the specified SNMP manager for doing SNMP

v1/v2. Set this to 255.255.255.255 to allow any SNMP manager to access.

When you are finished making changes, click Apply to save your settings.

SNMP for Access Point Groups

Enable SNMP to allow the SNMP network management software, such as HP OpenView, to

monitor the managed access points by using SNMPv1/v2 protocol. These settings are only

applied only on ProSafe access points that support SNMP.

Use the Group tab to select the settings for a specified group of access points. The access

points that have not been assigned any group share the settings of Group 1.

• Read-Only Community Name: The community string that allows the SNMP manager to

read managed wireless access point MIB Objects.

• Read-Write Community Name: The community string that allows the SNMP manager to

read and write managed wireless access point MIB objects.

• Trap Community Name: The community name of the IP address to receive traps.

• IP Address to Receive Traps: The IP address at which the SNMP manager receives

traps sent from managed wireless access points.

• Trap Port: The port on which the SNMP manager receives traps sent from the managed

wireless access points. The default setting is port 162.

• SNMP Manager IP: Restrict access to specified SNMP manager for doing SNMP v1/v2.

Set this to 255.255.255.255 to allow any SNMP manager to access. This setting is

specific to WG103 access points, and is not applied to any other access point models.

Click Apply to save the settings.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 65 66

No comments

Netgear WMS5316 User Manual Page 49