Netgear RANGEMAX WPN511 User Manual download pdf (Page 56)

User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511

C -2 P rep aring Y ou r P C s for N etwork A ccess

February 2005

Configuring Windows 95, 98, and Me for TCP/IP Networking

As part of the computer preparation process, you need to manually install and configure TCP/IP on

each networked computer. Before starting, locate your Windows CD; you may need to insert it

during the TCP/IP installation process.

Installing or Verifying Windows Networking Components

To install or verify the necessary components for

IP networking:

1. On the Windows taskbar, click the Start

button, point to Settings, and then click

Control Panel.

2. Double-click the Network icon.

The Network window opens and displays a list

of installed components.

3. Make sure that the following components are

installed:

• Client for Microsoft Networks

• Ethernet Adapter

•TCP/IP

4. The Primary Network Logon should be set to

Client for Microsoft Networks.

5. If any of these items needs to be installed,

follow the steps below.

Note: It is not necessary to remove any other network components shown in the Network

window in order to install the adapter, TCP/IP, or the Client for Microsoft Networks.

Installing a New Adapter

If you need to install a new adapter, follow these steps:

a. Click the Add button.

b. Select Adapter, and then click Add.

c. Select the manufacturer and model of your Ethernet adapter, and then click OK.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 74 75

No comments

Netgear RANGEMAX WPN511 User Manual Page 56