Netgear RANGEMAX WPN511 User Manual download pdf (Page 63)

User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511

Preparing Your PCs for Network Access C-9

February 2005

DHCP Configuration of TCP/IP in Windows 2000

After you have installed the network card, TCP/IP for Windows 2000 is configured. TCP/IP

should be added by default and set to DHCP without your having to configure it. However, if there

are problems, follow these steps to configure TCP/IP with DHCP for Windows 2000.

1. Check the Local Area Connection

Properties Settings.

a. Click the My Network Places icon on

the Windows desktop. The Network

and Dial-up Connections window

opens.

b. Right click on “Local Area

Connection” and select Properties.

The Local Area Connection Properties

dialog box appears, as shown to the

right.

c. Verify that you have the correct

Ethernet card selected in the “Connect

using:” box.

d. Verify that at least the following two

items are displayed and selected in the

“Components checked are used by this

connection:” box:

• Client for Microsoft Networks

• Internet Protocol (TCP/IP)

e. Click OK.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 74 75

No comments

Netgear RANGEMAX WPN511 User Manual Page 63