Netgear ProSafe SSL312 User Manual Page 83

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 82
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Configuring the SSL VPN Tunnel Client and Port Forwarding 6-3
v2.0, May 2007
Split tunnel – Sends only traffic destined for the internal network based on the specified
client routes. All other traffic is sent to the internet. Split tunnel allows you to manage
your company bandwidth by reserving the VPN tunnel for corporate traffic only.
Beyond what is defined in “Web Browser Requirements” on page 1-2, the VPN Tunnel Client has
some specific operating requirements. For
Mac OS. VPN Tunnel supports Version 1.4 (Tiger).
Browsers. The Firefox browser supports only VPN tunnel, VNC, Network places and Utilities
(IE is required for Port Forwarding, Applications, and Terminal Services).
Adding IP Address Ranges
Determine the address range you will assign to VPN Tunnel Clients, then define the address range
in the SSL VPN Concentrator administrative interface.
To configure the SSL VPN Tunnel client address range:
1. Under Access Administration in the left navigation pane, select VPN Tunnel. The VPN Tunnel
Client screen displays.
In the Client IP Address Range section of the screen, you can define the IP address range to
assign to incoming VPN Tunnel clients. The default range begins with 192.168.251.1 and ends
with 192.168.251.254.
2. In the Client Address Range Begin field, enter the first IP address of the IP address range.
3. In the Client Address Range End field, enter the last IP address of the IP address range.
4. Select one of the following:
Enter the Network Subnet to enable Split Tunnel Mode (point-to-point). If you choose a
different subnet for the VPN Tunnel client range than the subnet used by the corporate
network, then you must:
a. Add a client route to configure the VPN Tunnel client to connect to the corporate
network using the VPN tunnel.
b. Create a static route on the corporate network firewall to forward traffic intended for
the VPN clients to the SSL VPN gateway.
Select the Enable Full Tunnel Support check box to enable Full Tunnel mode. The VPN
client will install an 0.0.0.0 route on the client machines that will forward all traffic to the
SSL Concentrator.
5. Click Apply to update the configuration.
Page view 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 121 122

Comments to this Manuals

No comments