Netgear ProSafe SSL312 User Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Additional System Configuration 7-3
v2.0, May 2007
2. Enter the Ethernet Port 1 subnet mask that has been configured for your network. The subnet
mask value should be the same value as the subnet mask configured on your network
computers. The factory default is 255.255.255.0 (The subnet mask specifies the network
number portion of an IP address.).
3. Only if you plan to use two port mode, enable routing mode by checking this checkbox. The
second Ethernet port will be enabled.
4. Enter a local or internal IP address of your ProSafe SSL VPN Concentrator 25. This address
should be in a different subnet than the Ethernet Port 1 IP address. The default Ethernet Port 2
IP Address is 10.0.0.1.
Figure 7-2
Note: NETGEAR recommends one port operation for most networks.
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 121 122

Comments to this Manuals

No comments