Netgear SRX5308 Specifications download pdf (Page 88)

Firewall Protection

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308

Table 19. Inbound rules overview

Setting Description

Service The service or application to be covered by this rule. If the service or application does not

appear in the list, you need to define it using the Services screen (see Add Customized

Services on page 112).

Action The action for outgoing connections covered by this rule:

• BLOCK always

• BLOCK by schedule, otherwise allow

• ALLOW always

• ALLOW by schedule, otherwise block

Note: Any inbound traffic that is not blocked by rules you create is allowed by the default

rule.

Select Schedule The time schedule (that is, Schedule1, Schedule2, or Schedule3) that is used by this

rule.

• This drop-down list is activated only when BLOCK by schedule, otherwise allow or

ALLOW by schedule, otherwise block is selected as the Action.

• Use the schedule screen to configure the time schedules (see Set a Schedule to Block

or Allow Specific Traffic on page 121).

Send to LAN Server The LAN server address determines which computer on your network is hosting this

service rule. (You can also translate this address to a port number.) The options are:

• Single address. Enter the required address in the Start field to apply the rule to a

single device on your LAN.

• Address range. Enter the required addresses in the Start and End fields to apply the

rule to a range of devices.

Send to DMZ Server The DMZ server address determines which computer on your network is hosting this

service rule. (You can also translate this address to a port number.)

Translate to Port

Number

You can enable this setting and specify a port number if you want to assign the LAN

server or DMZ server to a specific port.

WAN Destination IP

Address

The setting that determines the destination IP address applicable to incoming traffic.

This is the public IP address that maps to the internal LAN server. This address can be

either the address of one of the WAN interfaces or another public IP address (when you

have a secondary WAN address configured).

You also have the option to enter an address range. Enter the required addresses in the

Start and End fields to apply the rule to a range of devices.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 356 357

No comments

Netgear SRX5308 Specifications Page 88