Netgear GSM712 User Manual download pdf (Page 21)

Page 20 of 24

Step 7: Connecting Devices to the Switch

The following procedure describes how to connect devices to the switch’s RJ-45 ports. Your NETGEAR

Model GSM712/GSM712F Managed Gigabit Switch contains Auto Uplink™ technology, which allows you

to attach devices using either straight-through or crossover cables.

Figure 3-8. GSM712 Connecting Devices to the Switch

Figure 3-9. GSM712F Connecting Devices to the Switch

20. Connect each device to an RJ-45 network port on the switch’s front panel (see Figure 3-8 or Figure 3-

9). Use Category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an RJ-45 connector to

make these connections.

Note: Ethernet specifications limit the cable length between the switch and the attached device to 100 m

(328 ft).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

No comments

Netgear GSM712 User Manual Page 21