Netgear FSM726 User Manual download pdf (Page 10)

Page 9 of 9

CHAPTER 2: PHYSICAL DESCRIPTION

This chapter describes the hardware features of the NETGEAR Model FSM726 Managed Switch. Topics

include:

Front and back panels

10/100 Mbps auto-sensing RJ-45 ports

Gigabit Ethernet Ports (RJ-45 and GBIC module bay)

LED descriptions

Console port

Reset Button

Front and Back Panels

Figures 2-1 and 2-2 show the key components on the front and back panels of the NETGEAR Model

FSM726 Managed Switch

The front panel contains LEDs, RJ-45 jacks, GBIC module bays, and a console port. The back panel has a

standard AC power receptacle for accommodating the supplied power cord.

Figure 2-1. Front Panel of the FSM726 Managed Switch

Figure 2-2. Back Panel of the FSM726 Managed Switch

10/100 Mbps RJ-45 Ports

As Figures 2-1 and 2-3 shows, the FSM726 Managed Switch has 24 10/100 Mbps RJ-45 ports. These

ports are auto-sensing 10/100 Mbps ports: When you insert a cable into an RJ-45 port, the switch

automatically ascertains the maximum speed (10 or 100 Mbps) and duplex mode (half- or full-duplex) of

the attached device. The 10/100 Mbps ports support only unshielded twisted-pair (UTP) cable terminated

with an 8-pin RJ-45 plug.

To simplify the procedure for attaching devices, all RJ-45 ports support Auto Uplink. This technology lets

you attach devices to the RJ-45 ports using either straight-through or crossover cables. When you insert a

cable into the switch’s RJ-45 port, the switch automatically:

• Senses whether the cable is a straight-through or crossover cable, and

• Determines whether the link to the attached device requires a “normal” connection (such as when

connecting the port to a PC) or an “uplink” connection (such as when connecting the port to a router,

switch, or hub).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

No comments

Netgear FSM726 User Manual Page 10