Netgear FS750T2 User Manual download pdf (Page 23)

Smart Switch Series Software Manual

Web-Based Management Interface 4-9

July 2005

Note: To allow untagged packets to participate in VLAN 2, make sure to change the Port VLAN

Ids (PVID) for the relevant ports. Access the PVID Settings by using the VLAN ID drop down

menu.

Delete a VLAN Group

• Under the VLAN ID drop down menu, select the VLAN you want to remove.

• Click to select Remove VLAN.

• Click Apply.

PVID Setting

All untagged packets entering the switch will by default be tagged with the port’s Primary VLAN

Identification (PVID). This screen allows you to specify the PVID for each port.

Take VLAN 2 for example: ports 5, 6, 7, and 8 have been checked as tagged ports for this VLAN.

You must change the PVID value from “1” to “2” for those ports to avoid losing untagged packets

when they are received.

Under the VLAN ID drop down menu, select PVID Setting. See below for an example of setting

PVID for VLAN 2.

Change the PVID value of ports 5, 6, 7, and 8.

Click Apply.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

No comments

Netgear FS750T2 User Manual Page 23