Netgear WN2000RPTv2 User's Guide download pdf (Page 7)

Getting Started

Universal WiFi Range Extender WN2000RPT

The extender LEDs can help you tell if the extender is correctly set up and working as it

should.

• The best performance is delivered when both the Link Rate LED and the PC to

Extender Connection LED

are green.

• A workable performance is delivered when the Link Rate LED is amber

and the PC

to Extender Connection LED

is green.

Positioning Your Extender

The ideal location to place the extender is half-way between your wireless router and your

computer.

Figure 3. Range extender location

The best connection is established when there is a clear line of sight between the extender

and the wireless router and also a clear line of sight between the extender and the computer

you are using. If this straight path is blocked by a thick wall or other materials, move the

extender to a different location half-way between the computer and the router.

If there is no power outlet nearby, or you prefer to place the extender elsewhere, move the

extender closer to the computer. If the Link Rate LED is green or amber and the PC to

Extender Connection LED is green, the extender is working as expected.

To improve the Link Rate LED from red or amber to green:

• Once you successfully connect to the extender from a computer that is outside the range

of your router and log in to www.mywifiext.net, the Smart Wizard guides you through the

process to connect the extender to a router.

• If the Link Rate LED is red or the Smart Wizard cannot connect the extender to a router,

move the extender closer to the router or to a different spot where it provides a better line

of sight. As you move the extender, continue to check the Link Rate and the PC to

Extender Connection LEDs on the front panel until you find a location where the Link

Rate LED is green or amber, and the PC to Extender Connection LED is green. Note that

you might have to unplug the extender as you move it to a different location. If you do,

from the new location, power up the extender and continue to check the LEDs.

Once the LEDs show that the extender is in a good location, open a browser and go to

http://www.mywifiext.net to continue the setup process.

1 2 3 4 5 6 7 8 9 10 11 12 ... 32 33

No comments

Netgear WN2000RPTv2 User's Guide Page 7