Netgear WN2000RPTv2 User's Guide download pdf (Page 19)

Extender Network Settings

Universal WiFi Range Extender WN2000RPT

• Use Static IP Address. Specify a static IP address. This is not usually necessary. If you

set this up, you should be technically experienced or have a technically experienced

person help you.

- IP Address. The static IP address.

- IP Subnet Mask. The subnet mask associated with the IP address.

- Gateway IP Address. The IP address for the gateway.

- Primary DNS. The primary domain name server (DNS).

- Secondary DNS. The secondary domain name server (DNS).

Status Screen

When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status

screen displays. You can also select Maintenance > Status to display this screen:

This screen shows the current settings and the status of your extender.

You can click Show Statistics to see device performance statistics such as the number of

packets sent and number of packets received for each port. See Show Statistics on page 21.

The following table describes the fields in the Status screen.

Table 2. Status Settings

Field Description

Hardware Version The hardware version of the extender.

Firmware Version The current firmware version of the extender. If you

upgrade the firmware, this field changes.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

No comments

Netgear WN2000RPTv2 User's Guide Page 19