Netgear WN511T User Manual download pdf (Page 30)

NETGEAR RangeMax™ NEXT Wireless Notebook Adapter WN511T User Manual

22 Network Connections and Wireless Security

vv1.1, April 2006

b. Use the icon to open the Smart Wizard. The Settings tab page opens.

2. Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

b. In the Network Name (SSID) field select the network, or enter the SSID.

c. In the Security section, select WPA2-PSK [AES].

For more information about WPA2-PSK security, see the Web link to “Wireless

Communications:” in Appendix B.

3. Save your settings in a Profile.

a. Click the Save Profile button. All the configuration settings are saved in this profile.

b. Click Apply.

c. Click Close to exit the Smart Wizard.

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1. Run the Wireless Adapter Smart Wizard.

a. Make sure the software is installed and the Wireless Adapter is fully inserted in a Cardbus

slot in your computer.

Figure 3-8

Note: You will not get a wireless network connection unless the network SSID

matches exactly what is configured in the access point.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

No comments

Netgear WN511T User Manual Page 30