Netgear FA510 User Manual

Model FA510 Network Card Installation Guide1.Double-click on “My Computer” on your desktop, double-click on “Control Panel,” and then double-click on

Model FA510 Network Card Installation Guide3.Double-click on “Network adapters” and then double-click on “NETGEAR FA510 Fast Ethernet CardBus Card.” I

Model FA510 Network Card Installation Guide4.The “Properties” window opens, and a message regarding the status of the device is displayed in the windo

Model FA510 Network Card Installation GuideModel FA510 Network CardStandards CompatibilityNetWare tested and approved Microsoft® Windows 95, Windows 9

Model FA510 Network Card Installation Guide© 1999 by NETGEAR, Inc. All rights reserved.TrademarksBay Networks is a registered trademark of Bay Network

Model FA510 Network Card Installation GuideNETGEAR, Inc.A Bay Networks Company4401 Great America ParkwaySanta Clara, CA 95054 USAPhone: 888-NETGEARhtt

Model FA510 Network Card Installation GuideInstructions in this guide are for users of Windows® who are installing theModel FA510 Network Card. For in

Model FA510 Network Card Installation GuideThe Model FA510 Network Card is hot swappable, which means it can beinserted into a PC that is either turne

Model FA510 Network Card Installation Guide1. Using a UTP cable, connect any port on the hub to the port on the RJ-45 adapter cable.2. To connect the

Model FA510 Network Card Installation GuideThis guide provides you with instructions for installing the Windows NetworkDriver. The steps given in thes

Model FA510 Network Card Installation Guide3.Select “Search for the best driver...”Click on “Next.”4.Select “Floppy disk drives.”Select “Specify a L

Model FA510 Network Card Installation Guide5.Click on “The updated driver...” and click on “Next.”6.Make sure that the location and the correct drive

Model FA510 Network Card Installation Guide8.Insert the Drivers and Diagnostics Disk and click on “OK.”9.Click on “OK.”10.Insert the Windows 98 CD-ROM

Model FA510 Network Card Installation Guide11.Click on “Finish.” 12. Be sure to remove the Drivers and Diagnostics Disk and the Windows 98 CD-ROM bef