Netgear WNDAP620 User Manual Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 172
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
Advanced Configuration
124
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620
g. Specify the settings as explained in the following table:
h. Click Apply to
save your security profile settings. The Bridging screen displays
again.
i. Repeat Step c through Step h for any other security profile that you want to edit.
Table 37. Point-to-multipoint bridge profile and authentication settings
Setting Description
Profile Definition
Profile Name Enter a profile name that is easy to remember. The default names for the four
secu
rity profiles are NETGEAR-WDS-1, NETGEAR-WDS-2,
NETGEAR-WDS-3, and NETGEAR-WDS-4.
Remote MAC Address Enter the MAC address of the remote wireless access point (the MAC
ad
dress of AP2 or AP 3 on LAN Segment 1 in Figure 70 on
page 122).
Authentication Settings
Network Authentication
and
Data Encryption
From the Network Authentication drop-down list, select Open System,
WPA-PSK, or WPA2-PSK. Your selection determines the options that the
Data Encryption drop-down list provides, and whether the WPA Passphrase
(Network Key) field displays.
Open System Although you can use the bridge co
mmunication without any
authentication and encryption, NETGEAR recommends that
you use WEP if you do select an open system. From the
Data Encryption drop-down list, select one of the following:
None. N
o authentication and encryption.
64-b
it WEP. Standard WEP encryption, using 40/64-bit
encryption.
128
-bit WEP. Standard WEP encryption, using
104/128-bit encryption.
152
-bit WEP. Proprietary WEP encryption mode, using
128+24 bit encryption. This mode functions only with
other wireless stations that support this mode.
WPA-PSK TKIP (T
emporal Key Integrity Protocol) is the standard
encryption method used with WPA-PSK and the only
selection possible from the Data Encryption drop-down list.
In the WPA Passphrase (Network Key) field, enter a
p
assphrase. The passphrase length needs to be between
8 and 63 characters (inclusive).
WPA2-PSK AES (Adva
nced Encryption Standard) is the standard
encryption method used with WPA2-PSK and the only
selection possible from the Data Encryption drop-down list.
In the WPA Passphrase (Network Key) field, enter a
p
assphrase. The passphrase length needs to be between
8 and 63 characters (inclusive).
Note: NETGEAR recommends WPA2-PSK authentication
with AES en
cryption if you want to use the 11n rates and
speed.
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 171 172

Comments to this Manuals

No comments