Netgear WNAP210 User Manual download pdf (Page 36)

Management

ProSafe Wireless-N Access Point WNAP210

Save or Restore the Configuration File

The access point settings are stored in the access point in a configuration file. This file can be

saved (backed up) or restored. You can also restore the factory settings as described in

Enable the Syslog Server on page 37.

 To save your settings in a configuration file:

1. Select Maintenance > Upgrade > Backup Settings to back up your current

settings.The Backup Settings screen displays.

2. Click Backup. Your browser extracts the configuration file from the access point and

prompts you for a location on your computer to store the file.

3. Give the file a meaningful name, such as WNAP210.cfg

,and click Save.

 To restore your settings from a saved configuration file:

1. Select Maintenance > Reset > Restore Defaults. The Restore Defaults screen

displays.

2. Select No for Restore to factory default settings and then click Apply. This displays a dialog

box allowing you to select a file where you have previously saved configuration settings.

3. Enter the full path to the file on your computer, or click the Browse button to locate the file.

4. When you have located the file, click Restore to upload the file. After completing the upload,

the access point reboots automatically.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 81 82

No comments

Netgear WNAP210 User Manual Page 36