Netgear WNAP210 User Manual download pdf (Page 13)

Installation and Configuration

ProSafe Wireless-N Access Point WNAP210

3. Select Configuration > System > Basic > Time.

4. Adjust the following fields:

• Time Zone. From the drop-down list, select the local time zone for your access point

from a list of all available time zones. The default is USA-Pacific. The access point will

get the current time from the connecting computer.

• NTP Client. Enable the NTP client to synchronize the time of the access point with an

NTP server. The default is Enable.

Note: You need an Internet connection to get the current time using an

NTP client.

• Use Custom NTP Server. Select this check box if you have a custom NTP server.

The default is not selected.

• Hostname / IP Address. Enter the host name or the IP address of the custom NTP

server. The default is time-b.netgear.com.

5. Click Apply.

6. Specify the IP settings as described in the following section.

Set Basic IP Options

Enter the basic IP settings for your access point on this screen. The default settings work in

most cases. However, if your access point is part of a more complex LAN network, then

modify these settings to meet the requirements of your network.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 81 82

No comments

Netgear WNAP210 User Manual Page 13