Netgear WAC120 Installation Guide download pdf (Page 6)

Make sure that your modem is cabled only to the wall jack for

your Internet service.

2. Connect your devices.

a. Plug in, then turn on your gateway or modem.

b. With an Ethernet cable, connect your gateway or modem to

a network switch.

c. With the Ethernet cable that came with the access point,

connect the network switch to the LAN port on your access

point.

3. Add power to the access point.

1 2 3 4

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Netgear WAC120 Installation Guide Page 6