Netgear WNR834Bv2 User Manual download pdf (Page 27)

Installing Your Router Manually (Advanced, Mac, and Linux Users) 23

To manually check for new router firmware:

Open a browser window and type http://www.routerlogin.net in the address field of your

browser. Press Enter.

2. When prompted, enter the default User Name and Password (admin for the router User Name

and

password for the router Password), both in lowercase letters. If you changed the User

Name and Password from the defaults, then enter your new User Name and Password.

3. Select Router Status under the Maintenance menu on your router interface. When the

Router Status screen displays, note the version number of your router firmware.

4. Go to http://www.NETGEAR.com/support and select Downloads from the menu bar.

5. From the Product Selection pull-down menu, select your router model number. The Product

Support page for your router will display.

6. Under Downloads, check the most recent Firmware Version offered against the Firmware

Version shown on your Router Status screen.

7. If a the version on the NETGEAR website is more recent, click on the version number. Then,

click Right-click and Save to Download and save the file to a location on your hard disk.

8. Follow the procedure in “To upgrade your router:” to complete the upgrade process.

Configuring Your Wireless Settings and Security

Options

The Wireless Settings screen lets you set your Wireless Network connections and select the

appropriate and optimum Security Options for your network and router.

For Advanced Users Only! If you are using the Microsoft Vista OS, you can elect

to use Windows Connect Now to implement WPS (Wi-Fi Protected Setup) and

configure the SSID and WPA security password for your router. You will be

prompted for your security PIN number which is on the label at the back of your

router (see “Router Label” on page 4). To configure other router settings, access the

router interface following the steps below; or see the link to your Reference Manual

on the Resource CD.

This feature is available only if the router is in its default state or if the “allow a

registrar to configure this router” radio box has been checked.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

No comments

Netgear WNR834Bv2 User Manual Page 27