Netgear WNR834B User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
2-6 Safeguarding Your Network
v2.1, July 2007
Basic Wireless Settings Setup Form
Before customizing your wireless settings, print this form and record the following information. If
you are working with an existing wireless network, the person who set up or is responsible for the
network will be able to provide this information. Otherwise, you must choose the settings for your
wireless network. Either way, record the settings for your wireless network in the spaces below.
Wireless Network Name (SSID): ______________________________
The SSID identifies
the wireless network. You can use up to 32 alphanumeric characters. The SSID is case
sensitive. The SSID in the wireless adapter card must match the SSID of the wireless router. In
some configuration utilities (such as in Windows XP), the term “wireless network name” is
used instead of SSID.
•If WEP Authentication is used, circle one: Open System, Shared Key, or Auto.
WEP Encryption Key Size. Choose one: 64-bit or 128-bit. Again, the encryption key
size must be the same for the wireless adapters and the wireless router.
Data Encryption (WEP) Keys. There are two methods for creating WEP data encryption
keys. Whichever method you use, record the key values in the spaces below.
Passphrase Method. ______________________________
These characters are case
sensitive. Enter a word or group of printable characters and click Generate Keys. Not
all wireless devices support the passphrase method.
Manual Method. These values are not case sensitive. For 64-bit WEP, enter 10
hexadecimal digits (any combination of 0–9 or a–f). For 128-bit WEP, enter 26
hexadecimal digits.
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
If WPA-PSK or WPA2-PSK Authentication is used:
Passphrase: ______________________________
These characters are case sensitive.
Enter a word or group of printable characters. When you use WPA-PSK, the other devices
in the network will not connect unless they are also set to WPA-PSK and are configured
Note: If you select Shared Key, the other devices in the network will not connect
unless they are also set to Shared Key and are configured with the correct key.
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 127 128

Comments to this Manuals

No comments