Netgear WG111v2 User Manual download pdf (Page 33)

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual

v3.0, January 2007

4. Select Create with Passphrase and enter the passphrase. The configuration utility will

automatically generate the WEP keys.

If the passphrase method is not available in the other devices, you must manually enter the

keys to match exactly what is in the access point and other 802.11b wireless devices.

5. Save your settings in a Profile.

a. Click Save Profile. All the configuration settings are saved in this profile.

b. Click Apply.

c. Click Close to exit the configuration utility.

Setting up WPA2-PSK Security

Follow the steps below to configure WPA2-PSK Security.

1. Run the Wireless Adapter Smart Wizard.

a. Make sure the software is installed and the Wireless Adapter is fully inserted in a USB

port in your computer.

b. Use the icon to open the Smart Wizard. The Settings tab page opens.

2. Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

Note: The characters are case sensitive. Be sure to use the same passphrase for all the

wireless devices in the network.

Figure 20

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 45 46

No comments

Netgear WG111v2 User Manual Page 33