Netgear WG111v2 User Manual download pdf (Page 26)

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual

v3.0, January 2007

1. Use the icon to open the Smart Wizard. The Settings page opens.

2. Enter the network settings.

a. In the Network Type section, be sure that Access Point (Infrastructure) is selected.

b. In the Profile box, type the name of the profile.

c. In the Network Name (SSID) field select a network or enter the SSID.

3. Save your settings in a Profile.

a. Click Save Profile.

All the configuration settings are saved in this profile.

b. Click Apply.

c. Click Close to exit the wizard, or Cancel to return to the previous settings.

4. Check to make sure that you can connect to your network and to the Internet. For example, use

your browser to connect to the Internet, or check for file and printer access on your network.

If you cannot connect, check the Status bar in the Smart Wizard. See “The Smart Wizard

Status Bar” on page 7. For problems with accessing network resources, the Windows Client

and File and Print Sharing software might not be installed and configured properly on your

computers. See the link to “Internet Networking and TCP/IP Addressing” on page 35.

Figure 14

Note: You will not get a wireless network connection unless the network SSID

matches exactly the SSID used by the access point.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

No comments

Netgear WG111v2 User Manual Page 26