Netgear R6100 User Manual download pdf (Page 103)

Advanced Settings

103

R6100 WiFi Router

This is usually the name that you use in your email address. For example, if your main

mail account is JerAB@ISP.com, you would type JerAB in this field. Some ISPs (like

Mindspring, Earthlink, and T-DSL) require that you use your full email address when you

4. In the Password field, enter the password for the ISP connection.

5. In the Service Name name field, enter a service name.

If your ISP did not provide a service name, leave this field blank.

Note: The default setting of the Connection Mode field is Always on to provide

a steady IPv6 connection. The router never terminates the connection. If the

connection is terminated, for example, when the modem is turned off, the router

attempts to reestablish the connection immediately after the PPPoE

connection becomes available again.

6. Specify how the router assigns IPv6 addresses to the devices on your home network (the

LAN) by selecting one of the following radio buttons:

• Use DHCP Server. This method passes more information to LAN devices, but some

IPv6 systems might not support the DHCv6 client function.

• Auto Config. The default setting.

7. (Optional) Select the Use This Interface ID check box, and specify the interface ID that you

want to be used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

8. Click the Apply button.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 121 122

No comments

Netgear R6100 User Manual Page 103