Netgear FVS338 User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 198
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
FVS338 ProSafe VPN Firewall 50 Reference Manual
2-12 Connecting the FVS338 to the Internet
v1.0, March 2008
4. If your ISP has not assigned any Domain Name Servers (DNS) addresses, select the Get
dynamically from ISP radio box. If your ISP has assigned DNS addresses, select the Use
these DNS Servers radio box. Ensure that you fill in valid DNS server IP addresses in the
fields. Incorrect DNS entries may cause connectivity issues.
5. Click Apply to save the settings or click Cancel to revert to the previous settings.
6. Click Test to try and connect to the NETGEAR Web site. If you connect successfully and your
settings work, then you may click Logout or go on and configure additional settings.
You can also click on the Broadband Status link or the Current IP Address link to check on
connection status and current IP address.
Programming the Traffic Meter (if Desired)
The traffic meter is useful when an ISP charges by traffic volume over a given period of time or if
you want to look at traffic types over a period of time.
To enable the traffic meter:
Step 1.From the primary menu, select Monitoring, and then select Traffic Meter from the
secondary menu. The Broadband Traffic Meter screen will display. Fill out the information
described in Table 2-2.
2. Click Apply to apply the settings or click Cancel to return to the previous settings.
3. Select the Dialup Traffic Meter tab and repeat steps 1 through 3 to set the Traffic Meter the
the Dialup port (if required).
Note: Domain name servers (DNS) convert Internet names such as www.google.com,
www.netgear.com, etc. to Internet addresses called IP addresses. Incorrect
settings here will result in connectivity problems.
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 197 198

Comments to this Manuals

No comments