Netgear DG834GV User Manual download pdf (Page 26)

Setup Manual for the DG834GV Integrated ADSL Modem and Wireless Router with Voice

2-6 Troubleshooting

v1.0, February 2006

• Your ISP may require a login program.

Ask your ISP whether they require PPP over Ethernet (PPPoE) or PPP over ATM (PPPOA)

• If you have selected a login program, you may have incorrectly set the Service Name, User

Name and Password. See “Troubleshooting PPPoE or PPPoA”, below.

• Your ISP may check for your computer's host name.

Assign the computer Host Name of your ISP account to the ADSL modem wireless router in

the browser-based Setup Wizard.

• Your ISP only allows one Ethernet MAC address to connect to Internet, and may check for

your computer’s MAC address. In this case:

Inform your ISP that you have bought a new network device, and ask them to use the router’s

MAC address.

Configure your router to spoof your computer’s MAC address. This can be done in the Basic

Settings menu. Refer to the online help in the ADSL modem wireless router main menu.

Troubleshooting PPPoE or PPPoA

The PPPoA or PPPoA connection can be debugged as follows:

1. Access the Main Menu of the router at http://192.168.0.1.

2. Under the Maintenance heading, select the Router Status link.

3. Click the Connection Status button.

4. If all of the steps indicate “OK” then your PPPoE or PPPoA connection is up and working.

5. If any of the steps indicates “Failed”, you can attempt to reconnect by clicking “Connect”. The

ADSL modem wireless router will continue to attempt to connect indefinitely.

If you cannot connect after several minutes, you may be using an incorrect Service Name, User

Name or Password. There also may be a provisioning problem with your ISP.

Note: Unless you connect manually, the ADSL modem wireless router will not

authenticate using PPPoE or PPPoA until data is transmitted to the network.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Netgear DG834GV User Manual Page 26