Netgear CG814WG V3 User Manual download pdf (Page 60)

Wireless Cable Modem Gateway CG814WG v3 Reference Manual

A-2 Technical Specifications and Factory Default Settings

v1.0, June 2007

Factory Default Settings

You can use the reset button located on the rear panel of your gateway to reset all settings to their

factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button

for 5 seconds. The gateway will reboot and return to the settings shown in the following table.

Radio Data Rates 1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps

Auto Rate Sensing

Frequency 2.4-2.5 GHz

Operating Frequency Ranges: 2.412~2.462 GHz (US)

2.412~2.472 GHz (Japan)

2.412~2.472 GHz (Europe ETSI)

Encryption: 40-bit (also called 64-bit), 128-bit WEP data encryption,

WPA-PSK(TKIP), and WPA2-PSK(AES)

Table A-1. Default Configuration Settings

Feature Default Behavior

Gateway Login

User login URL http://192.168.1.1

User name (case sensitive) admin

superuser

Local Network (LAN)

Lan IP 192.168.1.1

Subnet Mask 255.255.255.0

RIP direction None

RIP version Disabled

RIP authentication None

DHCP server Enabled

DHCP starting IP address 192.168.1.2

DHCP Ending IP Address 192.168.1.254

DMZ Enabled or disabled

Time zone GMT

Specification Description

1 2 ... 55 56 57 58 59 60 61 62 63 64

No comments

Netgear CG814WG V3 User Manual Page 60