Netgear CG814WG V3 User Manual download pdf (Page 12)

Wireless Cable Modem Gateway CG814WG v3 Reference Manual

1-2 Connecting the Gateway to the Internet

v1.0, June 2007

You can use the LEDs to verify connections. Table 1-1 lists and describes each LED on the front

panel of the CG814WG v3 Gateway.

Table 1-1. LED Descriptions

LED Description

Power • On: Power is supplied to the gateway.

• Off: Power is not supplied to the gateway.

Cable Link • On (green): Configuration of the cable interface by your cable service provider

is complete.

• Off: Configuration of the cable interface is still in progress.

Upstream

Traffic

• Blink: Data is being transmitted to the cable interface.

• Off: The cable interface is idle.

Downstream

Traffic

• Blink: Data is being received from the cable interface.

• Off: The cable interface is idle.

Wireless • On: The wireless Access Point is operating normally.

Blink: Data is being transmitted or received on the wireless interface.

LAN

(Local Area

Network)

• On (green): The port has detected link with a 100 Mbps device.

• Blink (green): Data is being transmitted or received at 100 Mbps.

• On (yellow): The Local port has detected link with a 10 Mbps device.

• Blink (yellow): Data is being transmitted or received at 10 Mbps.

• Off: No link is detected on this port.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 63 64

No comments

Netgear CG814WG V3 User Manual Page 12