Netgear WNA1000 User's Guide download pdf (Page 30)

NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual

2-6

v1.0, August 2009

7. Within 2 minutes, return to the WNA1000 Smart Wizard screen, and click . The Smart

Wizard initiates your wireless connection.

8. You can use the Status Bar to verify your network connection. For more information, see

“Smart Wizard Status Bar” on page 1-9. Click Close to exit the Smart Wizard.

Generating a PIN to Connect to a Wireless Access Point or

Router

There are two ways to enable the wireless-N USB adapter to join a wireless network: using the

router or access point’s security PIN; or using the wireless-N USB adapter’s security PIN (the

wireless-N USB adapter can generate a PIN to connect to the router).

To use either the router’s security PIN or the adapter’s security PIN:

1. Click the icon to open the Smart Wizard of the wireless-N USB adapter. On the status bar,

click Join a Network (or click the Networks tab and select the network). The wireless-N

USB adapter detects a network with WPS.

2. To use a PIN, select No, and then click Next, then do either of the following:

Note: The adapter security is set to WPA-PSK [TKIP] by default. Some WPS routers

support WPA2-PSK [AES], with the same SSID and passphrase. You can

change the adapter to WPA2-PSK [AES] using the Security setting in the

Settings screen.

Figure 2-4

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

No comments

Netgear WNA1000 User's Guide Page 30