Netgear ProSafe GSM7248R User Manual download pdf (Page 27)

Default Settings and Technical Specifications A-1

v1.0, November 2007

Appendix A

Default Settings and Technical Specifications

This appendix provides the default settings and technical specifications for the ProSafe™ 24-Port

L2 Managed Switch with Static Routing GSM7224R and ProSafe™ 48-Port L2 Managed Switch

with Static Routing GSM7248R.

Default Settings

The following table lists the factory default settings for the switches. You can use the RST (reset)

button to return a switch to its factory default settings.

Table A-1. Default Configuration Settings

Features GSM7224R Default Settings GSM7248R Default Settings

Port speed Auto negotiation Auto negotiation

Port duplex Auto negotiation Auto negotiation

Flow control (half duplex) Enabled Enabled

Flow control (full duplex) Disabled Disabled

Broadcast storm control Enabled Enabled

Gigabit port type Auto detect Auto detect

Management IP

configuration

DHCP DHCP

Password protection Disabled Disabled

User name Admin Admin

Password (None) (None)

Web access Enabled Enabled

Java mode Enabled Enabled

VLAN All ports belong to default VLAN (VLAN

1) as untagged ports

All ports belong to default VLAN

(VLAN 1) as untagged ports

IP multicast filtering Disabled Disabled

Spanning Tree Protocol Enabled (IEEE 802.1s) Enabled (IEEE 802.1s)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Netgear ProSafe GSM7248R User Manual Page 27