Netgear FS524 User Manual download pdf (Page 9)

Model FS516/FS524 Fast Ethernet Switch Installation Guide

Before connecting the switch, be sure you review “Applications” for information

about determining the appropriate configuration for your networking needs.

To connect the switch:

1. Connect the devices to the 10/100 Mbps ports on the switch, using

Category 5 UTP cable and an RJ-45 plug.

2. Set the Normal/Uplink push button.

3. Set the FDX/AUTO toggle switches on the rear panel for the selected

duplex mode (the default setting is AUTO).

4. Connect one end of the DC power adapter cable to the power outlet on

the rear panel of the switch and the other end of the power adapter

cable to the wall outlet.

Refer to the following illustration when connecting the switch. Each of the

preceding steps has a corresponding reference number in the illustration.

Note: Ethernet specifications limit the cable length between your PC or server and the

switch to 328 feet (100 meters) in length.

Connect Devices to the Switch

Normal/Uplink

Power

Utilization%

10/100 Mbps

FS516

MODEL

Link

FDX

Link FDX

Fast Ethernet Switch

PORT

10/100Mbps

Auto 10/100 Mbps

Utilization%

10/100 Mbps

9195FA

Normal/Uplink

FDX

AUTO

Duplex Mode

Normal/Uplink push button set to the Normal position for connection

to the server.

RJ-45

connector

For a typical configuration, set toggle switches to AUTO. For more

information, refer to "FDX/AUTO Duplex Toggle Switches."

100 Mbps

10 Mbps

Key

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

Netgear FS524 User Manual Page 9

Comments to this Manuals

Related products and manuals for Network switches Netgear FS524