Netgear FS 524S User Manual download pdf (Page 39)

5-1troubleshooting

CHAPTER 5:TROUBLESHOOTING

This chapter provides information about troubleshooting the NETGEAR FS517TS or

FS524S Switches.Topics include:

• Troubleshooting chart

• Additional troubleshooting suggestions

Troubleshooting Chart

Table 5-1 lists symptoms, causes, and solutions of possible problems.

Table 5-1.Troubleshooting Chart

Symptom Cause Solution

Power LED is off. No power is received Check the power cord connections

for the switch at the switch.and the

connected device.

Make sure all cables used are

correct and comply with Ethernet

specifications.

1000M or 100M LED Port connection is not working Check the crimp on the connectors

is off or intermittnet. and make sure that the plug is

properly inserted and locked into the

port at both the switch and the

connecting device.

Make sure all cables used are

correct and comply with Ethernet

specifications. See Appendix C.

Check for a defective adapter card,

cable, or port by testing them in an

alternate environment where all

products are functioning.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

No comments

Netgear FS 524S User Manual Page 39