Netgear HDX111 User Manual download pdf (Page 25)

HDX111 Powerline HD Plus Ethernet Adapter User Manual

HDX111 Configuration Utility 2-7

v1.1, March 2008

Resetting to Factory Defaults

There are two ways to return the Powerline HD Plus Ethernet Adapter to its factory default

settings.

• Press the Security button on the Powerline HD Plus Ethernet Adapter for 12 seconds until its

Status light goes off.

• Use the HDX111 configuration utility to reset devices on the Powerline network one by one.

To use the HDX111 configuration utility to reset to factory defaults:

1. For a remote device in your network, click the device name to highlight it in the Main tab.

a. Click Factory Reset. The software will display a message similar to the following:

Note: If you use a custom network ID, as each device is reset it will be disconnected from

the Powerline network. To avoid losing access to the Powerline network in this

situation, first reset all remote devices and then reset the local device.

Figure 2-10

Figure 2-11

Select remote

devices first.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 37 38

No comments

Netgear HDX111 User Manual Page 25