Netgear HDX111 User Manual download pdf (Page 15)

HDX111 Powerline HD Plus Ethernet Adapter User Manual

Installing and Using the Powerline HD Plus Ethernet Adapter 1-5

v1.1, March 2008

2. Familiarize yourself with the Powerline HD Plus Ethernet Adapter. The front panel has a pass-

through outlet, a Standby button, a Security button, and three LEDs: AP, Status, and Ethernet.

The Ethernet port is located on the bottom.

3. Plan the location of your Powerline devices.

• Do not connect the Powerline HD Plus Ethernet Adapter to a power strip, extension cord,

or surge protector as this might prevent it from working properly or degrade the network

performance.

• Use an electrical outlet that is not controlled by a wall switch to avoid someone

unknowingly turning off the power to the outlet.

• For best Powerline performance, plan to connect adjacent electrical appliances of up to 15

amps directly to the pass-through AC outlet. The outlet filters out noise that affects

Powerline performance.

Installing the Powerline HD Plus Ethernet Adapter

These instructions explain how to add Powerline HD Plus Ethernet Adapters to your existing

network.

Follow these steps:

1. Plug a Powerline HD Plus Ethernet Adapter into a power outlet near your router.

Figure 1-3

Note: If the router is plugged into an adjacent outlet, you can plug it into the

pass-through outlet of the Powerline HD Plus Ethernet Adapter. The outlet

filters out noise that affects Powerline performance.

Pass-through outlet

Standby button

Security button

LEDs

Ethernet port

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

No comments

Netgear HDX111 User Manual Page 15