Netgear WGPS606 User Manual download pdf (Page 13)

Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch

Introduction 2-3

202-10083-01

Autosensing Ethernet Connections with Auto Uplink

The WGPS606 can connect to a standard Ethernet network. The LAN interface is autosensing and

capable of full-duplex or half-duplex operation. The wireless USB print server incorporates Auto

Uplink

technology. The Ethernet port will automatically sense whether the Ethernet cable

plugged into the port should have a ‘normal’ connection such as to a PC or an ‘uplink’ connection

such as to a switch or hub. That port will then configure itself to the correct configuration. This

feature also eliminates any concerns about crossover cables, as Auto Uplink will accommodate

either type of cable to make the right connection.

System Requirements

Before installing the WGPS606, make sure your network meets these requirements:

• A 100-240 V, 50-60 HZ AC power source

• A Web browser for configuration such as Microsoft Internet Explorer 5.0 or above, or

Netscape Navigator 4.78 or above

• At least one Pentium class computer (or equivalent) with the TCP/IP protocol installed and a

CD-ROM drive

• An 802.11b or 802.11g-compliant router or access point

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

No comments

Netgear WGPS606 User Manual Page 13