Netgear WG602v3 User Manual download pdf (Page 32)

Reference Manual for the NETGEAR 54 Mbps Wireless Access Point WG602v3

3-14 Basic Installation and Configuration

202-10060-02, February 2005

• Data Encryption: Select the desired option. The available options depend on the Network

Authentication setting above. The default is None. The supported options are:

– None – No encryption is used. This is the default.

– 64 bits WEP – Standard WEP encryption, using 40/64 bit encryption.

– 128 bits WEP – Standard WEP encryption, using 104/128 bit encryption.

– 152 bits WEP – Proprietary mode that will only work with other wireless devices that

support this mode.

– TKIP – This is the standard encryption method used with WPA.

– AES – This is the standard encryption method for WPA2. Some clients may support AES

with WPA, but this is not part of the 802.11 standards and is not supported by this Access

Point.

• Passphrase: To use the "passphrase" to generate the WEP keys, enter a passphrase and click

the "Generate Keys" button. You can also enter the keys directly. These keys must match the

other wireless stations.

• Key 1, Key 2, Key 3, Key 4: If using WEP, select the key to be used as the default key. Data

transmissions are always encrypted using the default key. The other keys can only be used to

decrypt received data.

• WPA Passphrase (Network Key): If using WPA-PSK, enter the passphrase here. All wireless

stations must use the same passphrase (network key). The network key must be from 8 to 63

characters in length.

• Wireless Client Security Separation: If enabled, the associated wireless clients will not be

able to communicate with each other. This feature is intended for hotspots and other public

access situations. The default is Disabled.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 121 122

No comments

Netgear WG602v3 User Manual Page 32