Netgear WG602 User Manual download pdf (Page 9)

Restore Factory Default Settings

You may click on the Restore Factory Default Settings button to revert to default factory settings.

Station List

The Station List window displays the assigned ID, MAC address, device name, and the

current state of the clients that are currently connected to the access point.

Reset Access Point

You can reset the Access Point by selecting this management option.

Advanced Options

Wireless Settings

To setup your advanced wireless LAN settings, complete the following:

1. Choose the Wireless Settings option from the Access Point Advances menu on the

WG602 Web Server home page.

2. Specify your wireless configuration settings. When you are done, click Apply for the

changes to take effect.

Note: Be sure to make the same configuration changes on the other wireless adapters in

your network.

Upgrade Firmware

The Firmware Upgrade menu options will display the Firmware Upgrade window so that you

may upgrade your latest WG602 firmware.

Before upgrading the WG602 firmware, make sure you have downloaded the latest firmware

from the NETGEAR support web site: http://www.netgear.com/support.

1. Enter the location of the WG602 firmware file name or click the Browse button to locate

the file on your local disk.

2. When you are done, click the Upgrade button and then the Reboot button for the

changes to take effect.

You may click the Upgrade button to perform the upgrade operation.

Configuration Description

File Name Specifies the WG602 firmware image file.

Browse

You may click on the Browse button to locate and select the

firmware image file residing on the system that's used for

configuring the access point.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No comments

Netgear WG602 User Manual Page 9