Netgear JGS524E User Manual download pdf (Page 26)

Quality of Service

ProSafe Plus Switch Utility

All the QoS features have default settings. It is not necessary to configure any settings to use

the ProSafe Plus switches. The following table lists the default settings.

Table 2. QoS Global Configuration Default Settings

Feature Setting

QoS Mode 802.1p Based

Port Priority Low priority for each port

Rate Limit

Ingress No limit

Egress No limit

Broadcast Filtering Disabled

QoS Global Configuration

Global configuration allows you to assign priorities for how the switch transmits data. Priority

can be assigned either by port number (Port Based) or by the type of data being transmitted

(802.1p based). You would typically want to assign a low priority for normal classes of data

(email, internet browsing, and ordinary data transfers) and high priority to video, voice, and

other delay sensitive data.

Port Based Priority

Port-based priority works by assigning a priority to all data passing through a particular port.

A higher priority transmits data with a minimum of delays. If packets arrive at several ports at

the same time, the ports configured as higher priority transmit their packets first. You must

determine which ports are going to carry delay sensitive data.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

No comments

Netgear JGS524E User Manual Page 26