Netgear JGS524E User Manual download pdf (Page 17)

System Configuration

ProSafe Plus Switch Utility

Port Mirroring

Port mirroring allows a port to see the data on another port.

 To have a switch port see the data on another port:

1. Select System > Status, and select the switch.

2. Select Monitoring > Mirroring to display the Mirroring screen.

3. Enable Mirroring.

4. Select the source port or ports.

5. In the Destination Port drop-down list, select the port.

6. Click Apply. Data on the source port will be routed to the destination port.

Cable Test

Some switch models have a cable testing feature that allows you to check for cable faults. If

a cable fault is found on a port, the cable test gives an estimate of the distance of the fault

from the switch.

 To perform a cable test:

1. Click System > Monitoring > Cable Tester. The Cable Tester screen displays.

2. Select the ports to be tested and click TEST SELECTED PORT. The approximate distance

to the cable fault is displayed.

Note: The distance to the cable fault can be up to +/- 5 meters from the

actual fault.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 36 37

No comments

Netgear JGS524E User Manual Page 17