Netgear WG311 User Manual download pdf (Page 38)

Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311

3-6 Configuration

Figure 3-3: Settings tab page

b. Click the Settings tab to display the view shown above.

c. Select Ad-Hoc in the Network Type section.

d. Enter the SSID for the Ad-Hoc network.

e. Click Apply.

2. Save your settings in a Profile.

a. Type a descriptive name for the Profile Name.

b. Click Save Profile. All the configuration settings are saved in this profile.

c. Click Apply.

d. Click Close to exit the configuration utility.

3. Configure the PC network settings.

a. Configure each PC with either a static IP address or with the IPX protocol.

Note: For instructions on configuring static IP addresses or the IPX protocol, refer to the

networking tutorial on your NETGEAR 54 Mbps Wireless PCI Adapter WG311 Resource

CD.

b. Restart the PCs.

4. Verify wireless connectivity between your peer devices.

Verify connectivity by using the Ping program:

a. On the Windows taskbar click the Start button, and then click Run.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

No comments

Netgear WG311 User Manual Page 38