Netgear WNDA3100v3 User's Guide download pdf (Page 14)

Get Started and Connect to a WiFi Network

N600 WiFi USB Adapter

5. Select the Enter wireless information myself radio button.

6. In the Network Name (SSID) field, type the network name (SSID).

7. From the Security T

ype menu, select the network’s security type:

• None.

The network is not secure and does not require a key or passphrase.

• WEP (Open). If the encryption strength of the network is 64 bit, the network key must

consist of 10 hexadecimal digits. If the encryption strength of the network is 128 bit,

the network key must consist of 26 hexadecimal digits.

• WEP (Shared). If the encryption strength of the network is 64 bit, the network key

must consist of 10 hexadecimal digits. If the encryption strength of the network is 128

bit, the network key must consist of 26 hexadecimal digits.

• WP

A-PSK (TKIP). The network passphrase is 8–63 characters in length or

64 hexadecimal digits.

• WP

A-PSK (AES). The network passphrase is 8–63 characters in length or

64 hexadecimal digits.

• WP

A2-PSK (TKIP). The network passphrase is 8–63 characters in length or

64 hexadecimal digits.

• WP

A2-PSK (AES). The network passphrase is 8–63 characters in length or

64 hexadecimal digits.

Note: Hexadecimal digits consist of 0–9, a–f, and A–F characters only.

8. In the Passphrase field, type the network’

s WiFi password (passphrase).

If you selected the WEP security type, type the WEP key in the Key field.

9. Click the Connect button.

The adapter joins the network, which can take a few minutes. Your settings are saved in a

profile.

The Join a Network screen shows that the adapter is connected to the network, and the

genie status bar at the bottom of the screen displays information about the network

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

Netgear WNDA3100v3 User's Guide Page 14