Netgear Universal WiFi Range Extender WN3000RP User Manual download pdf (Page 14)

Extender Network Settings

Universal WiFi Range Extender WN3000RP

Connect the Extender to an Existing Network

You can use this menu selection to wirelessly connect the Extender to your home network.

1. From the Extender menu at http://www.mywifiext.net, select Setup > Connect to an

Existing Network. The Extender scans for wireless networks, and displays a list.

If your wireless network is not on the list, and it is up and running, see Positioning Your

Extender on page 7 for suggestions.

2. Click the radio button to select your

network from the list and click Continue.

The next screen displays:

3. Enter your network’s passphrase or key

and click Continue.

The Extender joins your wireless

network.

Use WPS to Add a PC to the Extender’s Wireless Network

WPS (Wi-Fi Protected Setup) lets you connect a computer or wireless device to the

Extender’s network without entering the wireless network passphrase or key. Instead, you

use a WPS button or enter a PIN to connect. WPS supports WPA and WPA2 wireless

security. If your Extender network is open (no wireless security is set), then connecting with

WPS automatically sets WPA2 + WPA wireless security on the Extender network.

The Universal WiFi Extender WN3000RP Installation Guide explains how to use WPS during

installation.

You can connect with WPS by using either the WPS button on the side of the Extender, or by

logging in to the Extender and clicking an onscreen WPS button.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

No comments

Netgear Universal WiFi Range Extender WN3000RP User Manual Page 14