Netgear R6200 User Manual download pdf (Page 53)

USB Storage

Dual Band 11ac WiFi Router R6200

3. You can use this screen to select a folder, change the share name, or change the read

access or write access from All – no password to admin.

The user name (account name) for All – no password is guest. The password for admin is

the same one that is used to log in to the router. By default, it is password.

4. Click Apply for your changes to take effect.

USB Storage Advanced Settings

You can set up the device name, workgroups, and network folders for your USB device.

To view or change USB Storage Advanced Settings:

1. Select Advanced > USB Storage > Advanced Settings to display the following

screen:

2. You can use this screen to specify access to the USB storage device.

• Network Device Name. The default is readyshare.

This is the name used to access the

USB device connected to the router.

• Workgroup. If you are using a Windows workgroup rather than a domain, the workgroup

name is displayed here.

The name works only in an operating system that supports

NetBIOS, such as Microsoft Windows.

• Access Method. The access methods are described here.

Network Connection. Enabled by default, this connection allows anyone connected to

the local area network (LAN) to have access to the USB drive.

HTTP. Enabled by default. Y

ou can type http://readyshare.routerlogin.net/shares to

access the USB drive.

HTTP (via Internet. Disabled by default. If you enable this setting, remote users can type

http://<public IP address/shares> (for example, http://1.1.10.102/shares) or a URL

domain name to access the USB drive over the Internet. This setting supports file

uploading only.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 130 131

No comments

Netgear R6200 User Manual Page 53