Netgear N600 Wireless Dual Band Gigabit Router WNDR3700v3 User Manual download pdf (Page 7)

Getting to Know Your Wireless Router 3

Front Panel

The front panel has nine status lights that you can use to monitor and verify various conditions.

There are also two switch buttons on the right (or at the top if the router is in its stand). The status

lights are described in Table 1, and the switch buttons in Table 2.

Figure 2

Table 1. Status Light Descriptions

Item Function Activity Description

Power Solid Amber The unit is starting up after being powered on.

Solid Green The unit startup has completed; the unit is ready.

Off Power is not supplied to the router.

Blinking Green Firmware is corrupted. See “Checking Basic Router Functions” on

page 27 for instructions on restoring your router firmware.

Blinking Amber

1. Firmware is upgrading.

2. Restore factory settings button pressed; restoring factory default

settings.

Internet Off No Ethernet cable is connected to the modem.

Solid Amber The Ethernet cable connection to the modem has been detected.

Solid Green An IP address has been received; ready to transmit data.

2.4 GHz

Mode

Off The radio at 2.4 GHz is off.

Solid Green The 2.4 GHz radio is operating on the unit.

5 GHz

Mode

Off The radio at 5 GHz is off.

Solid Blue The 5 GHz.radio is operating on the unit.

LAN

(Ports 1–4)

Solid Green The LAN port has detected a 1 Gbps link with an attached device.

Solid Amber The LAN port has detected a 10/100 Mbps link with an attached

device.

Off No link is detected on this port.

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

No comments

Netgear N600 Wireless Dual Band Gigabit Router WNDR3700v3 User Manual Page 7