Netgear DM602 User Manual download pdf (Page 35)

Basic Configuration of the Modem 4-1

Chapter 4

Basic Configuration of the Modem

This chapter describes how to perform the basic configuration of your Model DM602 ADSL

Modem for your Internet connection.

Accessing the Web Configuration Manager in the Modem

In order to use the browser-based Web Configuration Manager built into the modem, your

computer must have a web browser program installed such as Microsoft Internet Explorer or

Netscape Navigator. Because the Configuration Manager uses Java, your Web browser must be

Java-enabled and support HTTP uploads. NETGEAR recommends using Microsoft Internet

Explorer 4.0 or Netscape Navigator 4.0 or above. Free browser programs are readily available for

Windows, Macintosh, or UNIX/Linux.

To configure the modem for Internet access using your browser:

1. Turn on the modem and wait at least ten seconds for initialization to complete.

If you normally use a login program such as Enternet or WinPOET to access the Internet, do

not launch that program.

2. Configure your computer with the static IP address of 192.168.0.2, and a subnet mask of

255.255.255.0. If you need assistance with this, please refer to

“Preparing Your Computer for

TCP/IP Networking“ on page 3-1.

3. Launch your web browser, and click your browser’s Stop button.In the Address or Location

box of your browser, type http://192.168.0.1 and press ENTER.

A login window opens as shown in Figure 4-1 below.

Figure 4-1. Modem Login window

DM602.book Page 1 Friday, October 4, 2002 4:22 PM

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 65 66

No comments

Netgear DM602 User Manual Page 35