Netgear 762S User's Guide download pdf (Page 65)

Rev 2 May.12 65

5: Troubleshooting

This chapter provides suggestions for troubleshooting problems that

may arise when using your mobile hotspot.

The mobile hotspot network name does not

appear in the list of networks.

1. Refresh the list of networks.

2. Ensure that the Wi-Fi setting on your laptop (or other device) is

turned on.

3. Ensure that Wi-Fi is enabled on the mobile hotspot. The Wi-Fi

icon on the LCD should have a “0” beside it (not an

“x” ).

If you need to enable Wi-Fi on the mobile hotspot:

1. Use the USB cable to tether the mobile hotspot to your laptop.

(The first time you do this, it will take a few moments for the

drivers to install.)

2. Launch your browser and go to the Mobile Hotspot Homepage

(http://dna.mokkula).

3. Click the Wi-Fi users icon ( ).

4. Under Enable Wi-Fi, select On.

5. Click Save.

The No Signal icon appears on the LCD

screen.

If the No Signal icon ( ) appears on the LCD screen:

• Make sure you are in your service provider’s coverage area.

• Check the network technology setting (see Set Auto Connect and

Network Options on page 21). Under Network Technology,

ensure that Auto is selected in the drop-down menu.

The Wi-Fi radio is disabled icon appears on

the LCD screen.

If the Wi-Fi radio is disabled icon ( ) appears on the LCD screen,

it could be because:

• The mobile hotspot is in standby mode. Press the Navigation key

or WPS button. If the “x” is still there, ensure that Wi-Fi is

enabled.

• The Wi-Fi is disabled. To enable Wi-Fi:

a. Use the USB cable to tether the mobile hotspot to your

laptop.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 77 78

No comments

Netgear 762S User's Guide Page 65