Netgear PS111W User Manual download pdf (Page 82)

NetGear Print Server Manual

Physical Port Selects which physical printer port the logical port is mapped into. Converts LF to LF+CRAdd a carriage

return (CR) every time the line feed (LF) character code is received by the print server when any print data

is sent to this logical port.

String Before

Job

Provides the control character string to send to the printer before the first character of the job is sent to the

printer. One example of such an application would be switching to landscape mode when printing to the

logical port. The character string must be in hexadecimal format as in these examples:

ASCII = [Esc]&l0O

Hexadecimal = 1B266C304F

ASCII = [Esc]&l1O

Hexadecimal = 1B266C314F

String After

Job

Provides the control character string to send to the printer after the last character of the job is sent to the

printer. The character string must be in hexadecimal format as illustrated in the String Before Job example

above.

Physical Port Tab

This tab allows you to set the "Handshake Signal" used for communication between the Print Server

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 105 106

No comments

Netgear PS111W User Manual Page 82