Netgear RH340 User Manual download pdf (Page 4)

To conﬁgure your router, use the FirstGear

™

conﬁguration software

provided on the RH340 Resources CD.

To install FirstGear:

1. Insert the NETGEAR RH340 Resources CD into the CD

drive of your PC, and run the Setup program.

a. Click on Start from the Windows toolbar.

b. Click on Run.

c. Click on Browse.

d. Click on the CD drive.

e. Select Setup.exe.

f. Click on OK.

The Setup window opens, which loads the FirstGear

program to your hard drive.

The Welcome Window opens.

2. Click on Next.

The Choose Destination Location window opens.

3. Click on Next to install the FirstGear program in the

Program Files folder. If you want to have the program placed

elsewhere, click on Browse to ﬁnd an alternate location for

the software, and then click on Next.

The Select Program Folder window opens.

4. Be sure that “FirstGear for RH340” is shown in the Program

Folders entry ﬁeld (the default name), or select a folder from

the Existing Folders list.

You can type in a unique name for the folder. Verify that the

information on the screen is correct.

5. Click on Next.

The Setup Complete window opens.

6. Click on Finish.

FirstGear is now installed on your PC, and a FirstGear shortcut

icon now appears on the desktop of your PC.

You are now ready to launch FirstGear.

To launch FirstGear:

1. Double-click on the FirstGear icon on your desktop.

The Conﬁguration Wizard ISDN Line Information -North

America window opens, as illustrated below.

2. Enter your ISDN information.

Be sure to enter your directory numbers in the local format (for

example, 5551111). Do not enter the area code unless it is

required for local dialing.

3. Click on Next.

The Conﬁguration Wizard ISDN Test window opens, as

illustrated below.

4. Click on the ISDN Test button.

The ISDN test begins. If the test is successful, the NETGEAR

message window opens, informing you the test was successful.

5. Click on OK.

If the ISDN test fails, trace information will be displayed to help

in troubleshooting. If so, refer to the “Troubleshooting” section

in this guide, recheck your ISDN setup information and the

physical connection, and then enter the correct ISDN

information. If the test continues to fail, refer to the

“Troubleshooting” section in the

Reference Guide for the Model

RH340 Internet Access ISDN Router

. After you enter the correct

information and the test is successful, the “test successful”

message screen opens.

6. Click on OK.

The Conﬁguration Wizard ISP Information window opens, as

illustrated below.

7. Enter your ISP account information.

8. Click on Next.

The Conﬁguration Wizard ISP Test window opens, as illustrated

below.

Note:

Be sure the router is connected and has been

powered on for at least one minute before launching

FirstGear.

Installing FirstGear

Launching FirstGear

Note:

Be sure to enter the ISP’s phone number as you

would dial it from your location (for example, 1 + area

code and the seven digit number only if it is not a local

call).

Qgy,,

1 2 3 4 5 6

Comments to this Manuals

No comments

Netgear RH340 User Manual Page 4

Comments to this Manuals

Related products and manuals for Networking Netgear RH340