Netgear MA111v2 User's Guide download pdf (Page 41)

User Manual for the NETGEAR 11 Mbps Wireless USB Adapter MA111

Configuration 4-7

202-10032-01

How to Configure WEP Encryption Security

Follow the steps below to configure WEP Encryption Security.

1. Run the MA111 Configuration Utility.

a. Make sure the MA111 software is installed and the MA111 is connected to your PC.

b. Click the icon on the Windows desktop or in the system tray to open the Wireless

Configuration Utility.

2. Specify the SSID.

a. Click the Configuration tab.

b. Enter the Network Name SSID. This is also called the Wireless Network Name.

Note: You will not get a wireless network connection unless the network SSID matches

exactly what is configured in the access point.

Tip: You can select from the drop-down list of the available wireless networks and their

SSIDs at your location.

3. Enter the WEP settings

a. On the Configuration tab, select the Enable Encryption check box.

b. Select the WEP encryption strength you will use.

The choices are:

• 64-bit WEP data encryption

• 128-bit WEP data encryption

Note: Larger encryption keys require more processing and may slow the communications

response times.

c. Select Create with Passphrase and enter the passphrase. The configuration utility

automatically generates the WEP keys.

Note: The characters are case sensitive. Be sure to use the same passphrase for all the

wireless devices in the network.

If the passphrase method is not available in the other devices, you must manually enter the

keys to match exactly what is in the access point and other 802.11b wireless devices. The

Default Key setting must match what is set in the access point and the other 802.11

wireless devices.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 82 83

No comments

Netgear MA111v2 User's Guide Page 41